M96 Mini Horizontal Gasoline Engine Motor Model Science Educational Toys Kits

  
Mini Horizontal Air-Cooled Single-Cylinder 4-Stroke Oddball Hit and Miss Gas Engine Model. This is a horizontal single-cylinder 4-Cycle Oddball Hit and Miss Gas Engine Model with a unique and exquisite shape, stable and reliable structural design, and a wooden base for easy placement and operation. It is machined from brass, stainless steel and aluminum alloy. A brass sleeve is installed on the crankshaft support with a lubrication hole to lubricate the main shaft and reduce friction. Likewise, a lubricant cup is added to the cylinder! We have developed a new igniter specifically for this tiny engine that uses a 1.5V battery! It uses gasoline as fuel and can run for about 15 minutes per tank of fuel. Start working clockwise (facing the starting shaft) and when you start this engine you can hear it moving, maybe that's one of the things that fascinates us. When the ignition device is normal and the cylindercompression is normal, if the machine cannot start normally, it isvery likely that the carburetor oil needle needs to be adjusted. After tightening the main oil needle on the carburetor, loosena 1/4 turn and start the flywheel, so that the mixing ratio ogasoline and air can reach the normal working mixing ratio after several times. When the machine stops, turn off the power switch. Open the fuel tank screw and draw out the fuel. How to Start This Engine.

Check the wiring of the engine from the bottom plate, install three AAbatteries(4.5v). Fill the water tank with water. Unscrew the screw of the fuel tank.

Fill the fuel tank with gasoline(95#). When the filling is completed, press the carburetor port by hand onthe right side of the engine, and turn the flywheel clockwise for manytimes.

Its function can make the mixing The fuel fully enters the fuel pipe. Turn on the power and quickly turn the flywheel on the right side to start the engine. Name: Oddball Hit and Miss Gas Engine Model.

Material: Brass + Stainless Steel + Aluminum Alloy +. Start method: electric drill or hand start. Starting power supply: 1.5V 1 AA battery (not included).

Lubricating oil type: 2T engine oil. Engine1 set Accessories1 set Instruction manual1. We run our business with passion and every time an order comes in, we are not calm until the package is delivered quickly and safely to the destination, because we know you need it and you need it fast! Also, before placing an order with us, please check the local laws to see if the project is allowed by local laws.

We would appreciate it if you would take a moment to leave us a positive review or feedback about our products to help us improve our products and services. We will get back to you as soon as possible and give you a satisfactory answer. I believe that good communication can enable us to better solve the problems we encounter. We are committed to providing the best online shopping experience for our customers.

This includes a commitment to excellent customer service, even after your order has been delivered. Your questions will be answered within 24 hours.