A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. The engine is like a steam engine in that all of the engine's heat flows in and out through the engine wall. Package Included: 1x Hot Air Stirling Engine Model 4x Alcohol Bottle Specification: Name :Hot Air Stirling Engine Model Model:524378 Material: Stainless Steel; base:wood Color:Silver Sizes:21.5x10x16.5cm/8.46"x3.9"x6.49 Type:16 Cylinder(8 heating tube+8 cooling tube) Instructions: -The engine model on the horizontal position by hand toggle the flywheel to see if smooth, if there is a strong sense of raw astringent, check the connection rod is normal, whether the cylinder oil and dust, and if so, please use toilet paper to erase Not smooth. Toggle the flywheel feel pressure rebound within the cylinder body is a normal phenomenon, the cylinder is sealed.
The packing bag of alcohol lamp cotton wear into the metal cap lamp. Fill the alcohol lamp to less than two-thirds.
Alcohol lamp to the alcohol lamp, at the premise of ensuring safety, ignite the alcohol lamp about 2 minutes after the flywheel, until the flywheel automatic operation so far, the whole process of heating, hands may not touch. Ignition steps: First press the button to the gas tank, and then dial the valve above, ignition, waiting for about 30 seconds to heat, turn the propeller start, the position of the gas tank has a knob to adjust the level of the firepower, it can control the speed, in order to the service life of model, generally do not recommend adjustment, small fire 2000 turn enough.
Finally turn off the valve, and turn off the fire, be careful, be sure to wait until the natural cooling before touching the heating cylinder, so as not to be scalded. By the external heat source isothermal heating; 3. So on heat, for heat with; 4.To the coolant isothermal exothermic, complete a cycle. Features: -This is an external combustion engine in which the fuel is burned continuously, and the piston is moved by the expansion of air (or helium or hydrogen) as a medium, and the expansion gas is cooled in the cold chamber, and the cycle is repeated. Only a small alcohol lamp, you can make it fast rotation and strong power. As the external combustion engine to avoid the traditional internal combustion engine of the explosion to do work, in order to achieve a high efficiency, low noise, low pollution and low operating costs. The biggest advantage of the external combustion engine output and efficiency from the influence of altitude, very suitable for high altitude areas. Aerodynamics are rich in knowledge of physics, Engine principle is intuitive, educational toys, teaching experimental equipment can effectively cultivate children's interest in learning can also be used for classroom teaching, more intuitive and easy to understand. A floating bead links 8 cylinders and its piston to drive based on the motor power from hot air, hard to believe it is a engine model, super cool, 8 cylinders, 8 heating tube -8 fire-outlet sparks the fire flame to the stainless heating tube, cool Note: 1. Due to the different display and different light, the picture may not reflect the actual color of the item. Please allow little differs due to manual measurement. The item "16 Cylinder Hot Air Stirling Engine Motor Model Steam Power Stainless Steel Toy" is in sale since Friday, November 16, 2018. This item is in the category "Toys, Hobbies\Model Building\Tools, Supplies". The seller is "ellieshang" and is located in HK. This item can be shipped worldwide.