Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there's no air in the oil pipe. Its role can make the mixed gasoline fully enter the cylinder. Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position).
If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it's very likely that the carburetor needle should be adjusted. Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio of gasonline and air reach the normal working mix ratio. Due to the different display and different light, the picture may not reflect the actual color of the item. Please allow little differs due to manual measurement.
Kids should be accompanied by adult. Kids under 8 are not recommended to play. Please be carful when you add the fuel.1 x Upgrade Hit & Miss Gas Engine (With Base). An overview of the features and technical parameters. Item Name: Full Metal Hit & Miss Gas engine. Weight: About 2.2kg (Engine+Wooden Base). Size of Engine: 18012575mm (LWH). Size of Wooden Base: 1806650mm (LWH).
The best tappet Clearance: 0.5mm. We will respond to you within 24 hours and do our best to help you out!The item "Stirling Engine Metal Hit & Miss Gas Combustion Gasoline Cylinder Motor Model" is in sale since Monday, January 18, 2021. This item is in the category "Toys & Hobbies\Models & Kits\Tools, Supplies & Engines". The seller is "premiumquality4u" and is located in Shanghai. This item can be shipped worldwide.