1pc Hot Air Stirling Engine Motor Generator Education Model Toy New M16-03-L#SS. This is an external combustion engine, which makes the fuel burn continuously. Expanded air (or helium or hydrogen) acts as a medium to make the piston move. Expanded gas is cooled in the cold chamber and the cycle is repeated.
Put the engine model in a horizontal position. Take out the quartz heating tube and install the heating tube on the head of the heating cylinder. When assembling, please rotate the heating tube and push it slowly to ensure that the sealing ring and heating pipe will not be damaged by excessive force. Take out the alcohol lamp and add about 2/3 of alcohol to the alcohol lamp. (Please use pure alcohol to heat, do not use any fuel other than alcohol) To ensure safety, light the alcohol lamp.
Heating for about 20 seconds will start the flywheel. Heating the whole process, hands do not touch the high temperature position, to ensure safety under the premise of lighting alcohol lamp. Don't touch the baked test tube to avoid scalding.Lighting alcohol lamp for a long time, alcohol lamp can not be easily touched, in order to avoid burns. Machines are prohibited from lubricating oil.
For long-term use, please regularly clean the cylinder and piston, heating cylinder connecting rod and other parts. Keep the sliding parts running smoothly, so that the lasting power is abundant.This item is in the category "Toys & Hobbies\Models & Kits\Tools, Supplies & Engines\Engines". The seller is "newst_4678" and is located in this country: CN. This item can be shipped worldwide.