6HP 2Stroke Outboard Motor Fishing Boat Engine Water Cooling Model CDI 102CC

  
Description The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption.

It also has a 360-degree steering function that allows you to reverse the boat without shifting gears. It is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats. Key Features Easy to Drive: The main rod is made of aluminum, and its lightweight will not increase the entire weight of your boat and the difficulty of driving.

CDI Ignition System: This outboard motor features a CDI ignition system. 6HP 2Stroke Outboard Motor Fishing Boat Engine Water Cooling Model CDI 102CC. 6 HP 2 Stroke Outboard Motor Fishing Boat Engine Water Cooling Model CDI 102CC. The ignition system of this outboard motor has a CDI ignition system.

The main rod is made of aluminum, and its lightweight will not increase the entire weight of your boat and the difficulty of driving. This outboard motor features a CDI ignition system. You can start the motor quickly and safely. It saves your time and is convenient to use. The outboard motor with a superior engine water cooling system can overcome huge water resistance, increase driving speed and improve its efficiency. This outboard has a 360-degree steering function that allows you to reverse the boat at ease without shifting gears. This item has a tilt or lift function, and can be used for shallow water operation for your convenience. When it collides with an object underwater, the design can well protect the propeller that is running at high speed. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible.

The tightened brackets are used to secure the thruster and transoms of the boat so that the thruster will not fall from your boat. It keeps the water flow steady so that you can have a good driving experience. The package comes with a funnel, so you can add fuel to this motor conveniently. The handle of this motor is made of high-quality rubber, which increases the friction and prevents your hand from slipping. The outboard motor is suitable for a variety of small watercraft, such as.

Trim and Tilt System: Manual Tilt. Recommended Fuel: # 93 Gasoline. Recommended Gear Oil: Professional Gear Oil. Gear Oil Volume: 195ml6.6 fl.

Spark Plug: 25.0Nm(18.4 ft-lb) (2.55 kgf-m). Engine Oil Discharge Bolt: 18.0Nm(13.3 ft-lb) (1.84 kgf-m). Gear Ratio: 2.08 (27:13). Standard Fuel Tank Capacity: 12L Within 2.5L. Bore×Stroke: 5.54.3cm/2.171.69.

Dimensions: 4932106cm/19.2912.641.73. Package Size: 1126238.5cm/44.0924.4115.16. Net Weight: 20.74kg/ 45.72lbs.

Gross Weight: 25.9kg/57.1lbs. The item does not have a certificate of origin.

Please do not place an order if you mind. Please read the attached manual completely before use. And pay particular attention to the safety instructions included. Add gear oil to the gears before using the motor and change the gear oil after the break-in period (10 hours).

Also, our outboard motor does not contain gear oil, so please prepare it yourself. Do not touch or disassemble electrical parts during start-up or operation.

Keep hands, hair and clothing away from the flywheel and other rotating parts when the engine is running. Don't start the motor on the bank.

If you want to test the motor, it should be done in the river. Don't use the motor when no water comes out of it, and then check whether the pump impeller or the water outlet is blocked. Always disconnect power when replacing the propeller, removing debris around the propeller, charging batteries, transporting a boat, or when the motor is not in use. Please wash the motor with freshwater, so that it can greatly reduce the possibility of corrosion.

And the noise of this motor is the same as a motorcycle, which is normal. You must prepare a boat motor bracket or lifting board on your boat. The motor itself is light enough to be used on a boat under 100kg and can carry 4 people. However, the more weight it carries, the slower the speed.

Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Dear consumers, thank you for your patronage. The quality of our products is guaranteed, and all products provide excellent after-sales service. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. High-performance, good stability, Easy Operation. Easy installation, Convenient Use, Easy Operation.

Yachts, rubber boats, fishing boats, etc. Do not send to Brazil. Overall length 1040mm(40.9 in) Overall width 872m. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "provideautoparts" and is located in this country: US.

This item can be shipped to United States.

• * Feature *: high-performance,good stability,Easy Operation
• Feature 1: Easy installation,Convenient Use,Easy Operation
• apply to: Yachts, rubber boats, fishing boats, etc.
• Note:: Do not send to Brazil
• Bundle Description:: No
• shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Item location:: CA /NJ /Austell
• Transportation does not include:: canarias
• shipping notice：: Can not ship to Puerto Rico,Alaska/Hawaii
• Short shaft: 40cm
• Brand: HANGKAI
• Dimension: Overall length 1040mm(40.9 in) Overall width 872m
• Full throttle operating range: 5000-6000r/min
• Maximum output: 6HP
• Idling speed ( in neutral): 1000±100 r/min
• Gear ratio: 2.15(28/13)
• Integral fuel tank capacity: 2.5L
• Bundle Listing: Yes
• Rated Load (HP): 6HP
• Shaft Diameter: 40cm
• Modified Item: No
• Number Of Axes: /
• Modification Description: No
• Application: /